Subject: Ellison TB on a rotary
From: ACRE
Date: 3/3/2005, 10:16 PM


Paul wrote:

Hi, Paul...It has been suggested that even though an Ellison TB will provide enough airflow for a Lycoming 0320 or an 0360, that it would be insufficient for a rotary. Have you ever seen or heard of
a rotary engine equipped with an Ellison TB that has been run in anything? (auto, plane, airboat, dunebuggy, etc?).  Thanks in advance for your reply.  Paul Conner


Not that I know of. What is the matter with an IO 360 regular aircraft carb?

Paul Lamar


I have Elison on 220HP Franklin and it works fine. Some other guys in
South Africa have them too. TBI is a selling buzzword, it is a
carburator, but without a float. Ellison has a line of them and even
that one which I use should be sufficient for a two rotor rotary, but
they have a bigger one too.

Two  minuses  that I know:
1) it does not have a pump enriching the mixture in case of rapid
opening of the throttle. That is quite important on the ground. Advance
power rapidly and you kill the engine. No problem if you learn to be
easy on the throttle.

2) the connection of the control cable to the throttle is known to cause
problems, it has rather limited lifetime. There is an AD to check this
thing frequently.

Jerzy

 
The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2004 All world wide rights reserved.