Steve Thomas wrote:

Hello rotaryeng,

  I've purchased one of Ed Klepies heater cores and was thinking about
  a water control valve for controlling the amount of water flowing to
  the core, ala automotive applications.  The thinking being that a
  water control valve will give less/more heat as needed.

  By Ed's advice, the heater core will have no air flowing through it
  if the fan is in the "off" position, therefore, if you don't want
  heat, just turn the fan off. No valve is required and no valve
  reduces complexity.

  What have some of you-all done with this question?

--

Best regards,
 Steve Thomas                 mailto:steve@stevet.net

The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2004 All world wide rights reserved.