Richard Sohn wrote:

I never had/ave a problem starting my single rotor P-Port. The difference of my timing to the LeMans is the size and the shape of the port. I have the same opening timing, however, myport is a round
hole 1 1/2" dia on a 12A housing. An open issue is still power tuning including port closing, port size, port shape and intake length.
With good starting and smooth idle at 1200RPM, as it is now, I think it is a good start.

Richard Sohn
N-2071U

 
The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2004 All world wide rights reserved.