Subject: DXF for Cosman Windwalker
From: ACRE
Date: 3/9/2005, 9:37 AM


Here Paul,

This should help.  I'll get you some more photos soon to further illustrate the induction system.

Chris Cosman


What is the wingspan Chris?

Paul Lamar

The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2004 All world wide rights reserved.

30 feet.  The firewall is 44" wide X 28" tall.

Thanks again for all your help.

Chris


I was getting ready to use the 30 feet to scale the firewall :)
Do you really want to use two rads one on each side of the engine?
I think one underneath would be more practical.

Paul Lamar

....and easier too.  I'm certainly open to suggestions.  The question
is, practicality aside, which is more efficient?

Here's our philosophy; design it with way too much cooling, and adjust
as necessary.  The Cosman One had too much cooling capacity, it was much
easier to redo the inlets to get the temp back in line than it would
have been to come up with more cooling.  This is why we're leaning
towards 2 rads with the oil cooler underneath.

Chris Cosman

Are you willing to do curved side cowl flaps?

Paul Lamar
 
The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2004 All world wide rights reserved.