Roberto Costa wrote:
Dear Paul:
No rotary engines in Brazil ( the Mazda official shop closed doors), but seems that in Argentina and Uruguai some were imported, and are engines/parts available. I will make a trip to
the "pampas" (also to enjoy the fine red wine that come from Mendoza, in the Andes, and the superb meat).
But I have a question, perhaps a dumb one: it´s possible to use a separated system to lube the rotors, without the hassle to mix oil to the gas ? A sort a injection oil system once used
in 2-stroke motorcycles. Yamaha used the "Autolube", Kawasaki the "Injectolube" and Suzuki the best system of all, the "CCI", that injected oil in the carbs and in the crankshaft (Suzuki bikes lived
longer than the others due this lubrication system).
Any clue about how to rig a similar system in a 13 B?
Thanks again for the attention and support.
Truly,
Roberto Costa, São Paulo, Brazil
Yes Richard Sohn makes an adapter that goes between the pump and the block to
feed two cycle oil to the apex seals.
Richard <unicorn@gdsys.net>
Paul Lamar
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2004 All world wide rights reserved.