Paul wrote:

Hi, Paul. I need to ask a few questions, please.  If the two rotor housings are converted to peripheral porting, what, if anything is done to the stock or street ports in the end housing/center
plates?  Do they need to be filled, or can you just leave them alone?
     I seem to recall a discussion recently about using P-Ports and solid aluminum end and center plates.  Are the lightweight end plates that Racing Beat sells minus ports?  Sorry for the barrage
of questions.   Paul Conner

They are filled with epoxy. When the epoxy cures there should be a slight depression 
to allow the pressure on both sides of the rotor to equalize.
The end and center housing still have the side ports.

Paul Lamar

 
The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2004 All world wide rights reserved.