----- Original Message -----
From: "ACRE" <rotaryeng@earthlink.net>
Sent: Sunday, March 13, 2005 2:20 PM
Subject: Injector holders

This is an injector holder for an MSD 50 pound per hour injector.
Needless to say it can be welded to the 2 inch OD tube anywhere
along its length according to your preferences.

If you are looking for 250 HP or more NA you will need at least
a 50 pound per hour injector and a P-port. MSD is a reliable company
that produces quality products. Part number on the injector is PN 2013.
They also sell stand alone injector fuel delivery top mounts so there are
no requirements for a fuel rail. The injectors can be mounted
at any angle. MSD has a wide range of all the parts you need to build
an EFI system.

www.msdignition.com

We will have these available for two inch OD tubes used on P-port engines.
We are still looking for a distributor to retail this along
with all the other p-port stuff we are building like slide throttles
and bell mouths for 2 inch OD .065 wall tubing.

Paul Lamar

The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2004 All world wide rights reserved.

----------------------------------------------------------------------------
----






----------------------------------------------------------------------------
----






----------------------------------------------------------------------------
----






----------------------------------------------------------------------------
----