Well that is true if you are running lean but ANY aircraft engine running
full power
full rich for takeoff or top speed is .60 to .65 BSFC. Tracy Crook's
engine burns
20 gallons an hour during the Sun 100 Race. That would be 120 pounds an
hour. Divided
by .6 is 200 HP. About right for a low power RX8 engine with only four
ports
available rather than the six ports in the high power RX8 engine version.

Notice the dual HP and torque curves for this Mazda p-port four rotor
Lemans engine.
The curves are labeled  power and efficiency. I have applied Aubrey's
conversion
to the Lemans engine efficiency  BSFC curves. The BSFC curve for high
power configuration is
missing. No telling what it was and I don't think Mazda wants you to know
:)

Jarrett & Heidi Johnson wrote:

Paul, just for the record. I was reading some old emails and noted that
Tracy said he ran it lean of peak even when racing. This would lead me to
think that he's making even more power  [assuming a BSFC of 0.48-.50]
120/0.50=240 Hp Has anyone compared the offical speed around the course to
Rv's chart showing power req'd for that speed?

Just curious.

Jarrett Johnson

I don't recall that. Do you have the message?
Tracy sent me email a few days ago saying 30 pound injectors were not big 
enough for 250 HP.

Most people that race in the Sun 100 soup up their aircraft engines and
they run them at well over 3000 RPM. Props are cut down or repitched.
There is a company here in SoCal called LyCon that specializes in souping up 
aircraft engines for racing purposes. For that reason it is hard to correlate
Sun 100 speeds with HP.

Paul Lamar
 
The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2004 All world wide rights reserved.