Subject: Intake man air press sensors
From: ACRE
Date: 3/15/2005, 9:14 PM

Tracy's EFI/IGN computer uses two intake manifold pressure sensors connected
with 3/16 ID hose to the intake manifold. I found these cute
little 3/16" OD hose barb to 1/16th pipe thread adapters. Less
than a buck at McMaster Carr. PN 44555K127 You don't want those critical
hose connections to come undone. Not telling what the computer
will do. Here is where they connect on the P-port manifold
down stream from the slide throttle.


Paul Lamar
 
The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2004 All world wide rights reserved.