Brett & Tiana wrote:
I've just checked out the website of a Winnipeg, Manitoba rotary
engine performance shop called JHB Performance. The link is
http://www.jhbperformance.com
They specialize in refurbishing otherwise unuseable rotor housings
(assuming they're not warped) by applying a "Cermet" coating, supposedly the
same stuff used in the engine of the Lemans
4-rotor.
It first I thought they meant ceramic, but apparently this stuff
contains a carbide substance with a softer matrix material holding it
together. They also re-do end and intermediate housings and
rotors. Their durability claims sound encouraging but maybe, shall we
say, "optimistic."
My question is, has anybody on here actually used these housings and
if so, how are they holding up? This would be valuable info because the
latest word (at least according to the RX7 enthusiast
rumor mill) is that Mazda intends to discontinue production of 12A
and 13B rotor housings to free up production space and tooling for more
efficient Renesis engine production. May be just a
rumor
but if not, the refurbishing option is looming large--- especially
since their current prices appear to be half what Mazda is asking for a new
housing.
Ian wrote:
the FD3S rx7 was produced till 02' in Japan, Mazda has at least 10 years
worth of support for that car, I also just bought a new 13BT housing with no
problems and my mazda rep said nothing about
shutdowns in the BT line ( which would be the most likely candidate for
retooling. ). (Killing off a 13B housing line over in Japan would be similar
to retooling a SBC plant here.). Right now an rx7
owner in Calgary I believe, has had the coating done to a pair of his BT
housings. The general impressions were good however during JBH dressing it
seems that some of the coating edges were chipped
off, JBH redid the housings at no charge, the dressing seems to also to
be cross hatched as well. The fellow said this process is still ' under
development' for JBH, but he is going to be trying it
out this year.
ian
BAS
-Brett & Tiana wrote:
I am aware of the guy in Calgary and his experience thus far. I'm also in
Calgary but I don't know him personally. I may have to see if I can meet up
with him to view these housings, if he hasn't already began re-assembling
his engine.
For the record, the info about Mazda allegedly discontinuing peripheral
exhaust port housings came from a thread in the Canadian forum section of
the main RX7 club forum titled "Mazda Canada parts availability" and is
located on the last page or so of the thread. Apparently Mazda has just
informed members of the SCCA (a Canadian racing entity) that production of
these housings is to be discontinued effective immediately.
If that SCCA is the Sport Car Club of America we have them down here too.
I find that hard to believe. They may discontinue making them available in
North America as they can do that legally. I don't know the laws
in Australia but 3rd gen. were imported up to 1998 and as he says sold up to
2002 in Japan. It does not make good sense to stop production. I'll check with
Dave Lemon at Mazdatrix this afternoon.
BTW rotor housing coatings other than detonation gun application has brought
more than one company to it knees. Unless it is applied with a detonation gun
I would stay away from them.
Paul Lamar
"Echo Lake Fishing Resort (Georges Boucher)" wrote:
Hi!
In the states it's SCCA I Canada it's CASC not SCCA.
Georges & Gail Boucher
2126 Creighton Valley Road
Lumby, British Columbia
Canada V0E 2G1
Phone:(250) 547-6434
Fax:: (250-547-2342
www.echolakefishingresort.com
www.echolakefishingresort.ca
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2004 All world wide rights reserved.