Ken Welter wrote:
Alright now you got me thinking about doing it.
How are the tubes held in and sealed?? threaded in and orings or what??
Do you have any specifics on the bore size in the housing and on
the tube??
Ken Welter
Epoxy. I am picking up some high temp stuff tomorrow.
I will then have the right part number and source.
A 1 3/4 shell mill is perfect for roughing out the housing.
I am using 2 inch tube with .065 wall. I.875 ID.
Paul Lamar
Ken Welter wrote:
Epoxy ?? That's it ???
Ken
Yep. The tubes are roughed up on the end that goes into the housing
so there is a mechanical lock in addition to the 3000 psi bond.
You will use high temp epoxy or JB Weld to plug the side ports
anyway.
If you want you can weld a tab to the outside of the tube
and screw it to the housings like Power Sport did.
Paul Lamar
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2004 All world wide rights reserved.