The tubes are splayed 20 degrees but I think that is a bit
too much. 15 degrees might still give the Mustang II cowl clearance.
This is also a compromise fuel injector location.
When we test it on the dyno the ram air scoop and air box will
not be done. I will actually have more power at top speed with
the ram air scoop.
Paul, I urge you to have a set of fuel injector bungs shoooting
straight into the throttle/port, that way you can dyno both
configurations easily.
Hans Conser
Why?
We use two injectors per runner. No room down there. Besides putting fuel
injectors down by the exhaust is more of a fire hazard. Racing beat and Mazda
both report better BSFC with the injectors near the start of the runners.
They don't use them on street engines because of throttle response problems.
Not a problem for us.
Paul Lamar
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2004 All world wide rights reserved.