Subject: Here's the actual picture of the oil cooler
From: ACRE
Date: 3/24/2005, 10:21 PM



         What does this cooler sell for ??



     Kelly Troyer

Thomas Parkes wrote:

Kelly, et. al:

Regarding the Mazda Competition Oil Cooler, it's almost a case of if you
have to ask the price, you can't afford it.  The bad news is that it set
me back some $900!  But if it solves my hot day oil temperature problem,
it will be well worth it.  I bought the solution to a problem as much as
just an oil cooler.

Tom


This is one good reason why it is very very important to get the aerodynamics right on 
the heat exchangers. As I have said many times on here and the the NACA engineers
that invented the NACA scoop, said in their technical papers on the subject, NACA scoops 
don't work with heat exchangers. I know that all of you old timers have heard this from
me many times before so for this I am sorry. I am also sorry I did not pay
more attention to this when Jerry and I visited you in Prescott.

I am not saying that aerodynamics alone could fix your problem. 
I don't know since I have not seen the ducts or scoops
you have now. These pictures are old.

I also don't know if the stock 13B cooler is adequate for a turbo 3 rotor
on a hot day even with perfect ducts and scoops. I suspect it is not and 
I probably agree with you on this point. If the cowl is off I would like 
to see a few more pictures of what you have now in the way of scoops and 
oil cooler ducts.

Ed Anderson had a similar NACA scoop initially and it did not work either.
I suggested he change it to a simple perpendicular ram air scoop which  
worked much much better. This was back in 2001 or earlier. Probably before 
you were on here. Here is a picture of Ed's new scoop.

One needs a water manometer to see what is going on. One needs to measure 
the pressure distribution all over the front and back side of the heat exchanger. 
The back side of the heat exchanger must be located at least 10 inches away 
from any other object.

We will find out when you get your new cooler installed. Hopefully it
will work fine and the $900 will be money well spent.

Paul Lamar
 
The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net            
Copyright 1998-2005 All world wide rights reserved.