Subject: Methuselah Mustang exhaust
From: ACRE
Date: 3/24/2005, 8:14 AM


I was fooling around with the Mustang II cowl to see if the intake
manifold would fit. Decided to make the exhaust functional :)
The cannon is the ram air intake for the engine in keeping with
the fighter plane theme.

Paul Lamar

Colin Smith wrote:

Paul,

Like the look of the cowl and the cannon.

Re air removal from the cooling system, I note that the only bleed to
atmosphere appears to be from the bottom of the core. In the past you have
used overflow bottles connected to the plumbing near the suction of the
pump.

Is the plumbing layout shown a workable system or merely artistic?

Colin Smith

Its workable. You need small vent lines however from the top of the engine to the
bottle. Details not shown in most of my 3Ds but they absolutely have to be there.
The larger line running from the bottom of the bottle to the core is returning
the condensed vapor now in the form of liquid back to the system.

Paul Lamar
 
The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2004 All world wide rights reserved.