hi george

so how much for this bell housing
is this bell housing supposed to attach to one of those s beam type

engine

mounts
how much does this weigh
i recall it said that a rws redrive will bolt up to this but i don't

see and

mounting holes, are they on back face if not how do you align the

two pieces

accurately

mike

   Mike,
 Not George but maybe this will helpanswer your questions.......The

housings

pictured have not been machined yet.......Attachment are self

explanitory ! SP

 Last info said machined weight would be about 12 lb +/-.......FWIW

Kelly Troyer

To All,
Kelly is correct ( it MAY be less than 12lb), we won't really know what the
weight is until it's machined and Butch will be doing that on his for the
prototype testing.
I will wait until he does that until I machine my unit. The tolerances are
very tight and I want Butch to assess it all before I start hacking away at
it.

I'm just trying to keep you chaps up to date on the progress.

Mike the beam mount is another method of mounting; the sides of the
bellhousing (when machined) will have the attachments for the Barry mount
(same as the beam mount).

BTW, this unit is designed to take 3, 6 and 9 O'clock starters, manual or
Turbo starters and is designed to take Tracy's PSRU, plus my own Aussie
design PSRU.

Paul I will work on those side mounts but I feel that the beauty of being
able to mount it at any height ( for different installations) by merely
making some chrome molly sides, makes for a very 'flexible mounting
position' installation.

 Still working on costings at this stage.
George (down under)

The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net            
Copyright 1998-2005 All world wide rights reserved.