We will find out when you get your new cooler installed. Hopefully it
will work fine and the $900 will be money well spent.
Paul Lamar
Thomas Parkes wrote:
Paul:
Yes, the original scoop was fabricated before I learned of the design
limitation of NACA scoops with heat exchangers. When I enlarged the
scoop, as in the second photo, my oil temperatures went down about 10
degrees F, which helped. But ambient outside air temperatures above 85
degrees F still restricted by climb performance by requiring a 140 KIAS
cruise climb in order to keep oil temperature below 220 degrees F.
I have redone the oil cooler scoop a third time, removing any vistages
of a NACA scoop. Time and flight test will tell if it was worth it.
But that's the fun part. Almost anybody can fly a spam can.
Tom P.
Got any pictures of the new scoop and ducts Tom?
Paul Lamar
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2005 All world wide rights reserved.