Robert LeClercq wrote:

Paul
This may be the source you're looking for. He's in NZ.
regards, Robert

From: "jeff" <precisin@ihug.co.nz>
To: "Robert Leclercq" <rcl41244@yahoo.com>
Subject: Re: 3 rotor 18A
Date: Fri, 8 Oct 2004 16:53:32 +1300

--- jeff <precisin@ihug.co.nz> wrote:

               General Info on Rotary Kits

This is a general list of parts available to convert
mazda 13b/12a type
engines to 3 or 4 rotor variants ,only the modified
parts are
listed as most others are mazda items or are easily
fabricated
by a competent engine builder.
All prices are in NZ$ and are ex factory so no
allowances for
shipping etc have been made .
NZ customers should note that gst is charged on top
of these prices.

1. 3rotor crank assy NZ$2100 (12a based version same
price)

2. 4rotor crank assy NZ$3200 (includes special rear
c/weight)(12a same price)

3. Centre housing modification for 3 or 4 rotor kits
NZ$700 (2 req for 4 rotor)

4. Thru stud set (10mm) for 3 rotor NZ$175

5. Thru stud set (10mm) for 4 rotor NZ$195 (12mm
also available)

6. Dowel set for 3 rotor kit NZ$110

7. Dowel set for 4 rotor kit NZ$130

8. Direct oil feed for 3/4 rotor kits centre housing
NZ$90 (2 req for 4rotor)
   this mod is not a necessity only an upgrade for
the oiling system.

9. Replacement 20B shaft assy NZ$2100.

10. 20b shaft assy , 3 piece with extra needle
bearing assy NZ$2900

11. 13b/12a centre bearing crank kit (includes
housing mod) NZ$1800

note that the centre housing mod cost is only for
the mod ,it does not
include the cost of a std front gear or the housing
,these items esp
the housings vary greatly in price depending on the
year/type. They
can be priced on submission of mazda part number.

Sounds like the stuff Guru makes. This guy could be a reseller.
Prices seem high.

Paul Lamar

The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net            
Copyright 1998-2005 All world wide rights reserved.