Subject: Aremco News - March 2005
From: ACRE
Date: 3/31/2005, 11:08 PM

CSMALE wrote:

thought you might be internested in this,
smale@ncinternet.net

-------- Original Message --------
Subject:        Aremco News - March 2005
Date:   Thu, 31 Mar 2005 09:58:08 -0500
From:   Aremco News - March 2005 <aremconews@aremco.com>
Reply-To:       aremconews@aremco.com
To:     Aremco News - March 2005 <aremconews@aremco.com>

     In this issue


************************************************************************************

     Ceramabond? 813A High Temperature Adhesive Seals Tundish Nozzles

     Corr-Paint? CP4040 High Temperature White Coating

     Aremcolox? 502-1100 Machinable Ceramic


*************************************************************************************

     *_Ceramabond? 813A High Temperature Adhesive Seals Tundish Nozzles_*
     *__*

                                           *__*

     Ceramabond? 813A is a single-part, alumina-silica-filled paste that
     bonds tenaciously to ceramic, refractory, and metal substrates.
     This material is rated for operating temperatures to 3000 °F (1650
     °C) and exhibits exceptional mechanical strength, electrical
     resistance, and chemical resistance.  It provides torque strength of
     18.5 ft-lbs, volume resistivity of/ /10^9 ohm-cm and dielectric
     strength of 250 volts/mil.  The coefficient of expansion is 4.0
     ppm/°F (7.2 ppm/°C).

     The product is applied easily using a brush, syringe or automatic
     dispensing equipment.  Curing is accomplished by heating at 200 °C
     for 3 hours or drying at room temperature for 24 hours.  After
     curing the product exhibits minimal shrinkage.  Uncured material can
     be cleaned up easily with warm water.

     Ceramabond? 813A can be used to bond refractory shapes to metal
     shells, to seal refractory structures from leakage by molten metals,
     and to assemble small electrical components such as igniters,
     thermocouples, and gas sensors.

     The product is available from stock in pints, quarts, gallons, and
     five-gallon pails.


*****************************************************************************************
     *_Corr-Paint? CP4040 High Temperature White Coating_*
     *__*

     Corr-Paint? 4040 is a single-part, white-pigmented, silicone-based,
     water-dispersible coating system rated for OEM and MRO applications
     to 1100 °F (593 °C).  It is being used as a reflective coating for
     UV lamps in tanning booths, for example.  Other possible
     applications include corrosion protection for heat exchangers,
     crackers, reformers, and exhaust ducting.

     The product exhibits excellent adhesion to glass, quartz, ceramic,
     and sandblasted (recommended) or marginally prepared metal
     surfaces.  It dries rapidly at room temperature and cures readily at
     operating temperature.  The resultant color is stable and resistant
     to oxidation, UV, humidity, and salt spray.

     The product is applied easily using brush, roller, or conventional
     pneumatic spray equipment and is available from stock in pints,
     quarts, gallons, and five-gallon pails.


******************************************************************************************

     *_Aremcolox? 502-1100 Machinable Ceramic_*
     *__*

     Aremcolox? 502-1100 is an advanced alumino-silicate machinable
     ceramic ideal for producing low- cost ceramic parts for applications
     to 2100 °F (1150 °C).

     The product demonstrates exceptional mechanical, electrical, and
     thermal properties including a compressive strength of 25 Kpsi, a
     dielectric strength of 100 volts/mil, and a thermal conductivity of
     9.0 Btu-in/hr-ft²-°F and a thermal expansion coefficient of 2.5
     in/in/°F x 10^-6 .  It is ideal for thermal shock applications, and
     can be used in oxidizing, reducing, or vacuum atmospheres. It will
     not outgas in ultra-high vacuum and does not react with most molten
     metals, salts, or acids.

     Aremcolox? 502-1100 is machined easily using conventional tooling
     and after a simple firing procedure it is fully dense and
     temperature resistant.

     The product is available from stock in plates from 1/4" to 1"
     thickness, rods 1/4" to 7" diameter, and bars from 1" x 1" to 4" x
     4".  Parts can be fabricated from supplied prints.


*******************************************************************************************
     For more information on any of these products visit our website,
     www.aremco.com, e-mail us at aremco@aremco.com, or phone 845-268-0039.

     Best Wishes,

     Peter Schwartz, President, Aremco Products, Inc.

     707-B Executive Blvd.

     P.O. Box 517

     Valley Cottage, NY 10989

     T: 845-268- 0039

     F: 845-268- 0041


******************************************************************************

     Aremco - Since 1965, a leader in the development and production of
     adhesives, coatings, sealants, potting compounds and technical
     ceramics for applications to 3200ºF. Aremco's equipment division
     also produces dicing saws and screen printers for the electronics
     industries and high-temperature furnaces.

The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net            
Copyright 1998-2005 All world wide rights reserved.