Paul, could you possibly document the geometry and coordinates for the

sensor mounts of the crank angle sensors with respect to the front seal or
some landmark that could be transfered to a gen 3 or

gen 2 cover?
Thanks, Chrissi

www.CozyGirrrl.com
Cozy Mk-IV RG 13B-turbo
Plans #957 Chapter? big pieces done, details, details

Lets see what I have on this.
This is good info on the RX8. If you blow this up
and use it as a pattern to plasma cut a replica and use the RX8 sensor
everything will work with Tracy's computer.
I am sure Tracy is using this on his current RX8 engine.

Paul Lamar

Paul,
Would I have to modify the timing wheel, or just not connect the EMS wires
( for the second rotor) - for the single rotor I'm developing.
George ( down under)

That is a real can of worms. What kind of computer are you using?
The sensor has nothing directly to do with when the plugs fired.
the computer takes in a lot of info from a lot of places
and makes that decision.

Paul Lamar
 
The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net            
Copyright 1998-2005 All world wide rights reserved.