Paul, could you possibly document the geometry and coordinates for the sensor mounts of the crank angle sensors with respect to the front seal or some landmark that could be transfered to a gen 3 or
gen 2 cover?
Thanks, Chrissi

www.CozyGirrrl.com
Cozy Mk-IV RG 13B-turbo
Plans #957 Chapter? big pieces done, details, details

Lets see what I have on this.
This is good info on the RX8. If you blow this up
and use it as a pattern to plasma cut a replica and use the RX8 sensor
everything will work with Tracy's computer.
I am sure Tracy is using this on his current RX8 engine.

Paul Lamar

Thanks Paul, thats good information. Does anyone have part numbers (and prices?) for the front cover, crank angle sensor, and interrupter plate?

...Chrissi

www.CozyGirrrl.com
Cozy Mk-IV RG 13B-turbo
Plans #957 Chapter? big pieces done, details, details

I am not sure a RX8 front cover will fit a 3rd gen.
You might have to fab a steel bracket to hold the sensor
and use the front cover you have now. Pretty simple to do.
Pick up some pan bolts. should take about half an hour.

Paul Lamar
 
The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net            
Copyright 1998-2005 All world wide rights reserved.