Here is what the potted p-port tube insert looks like.
This is aluminum oxide filled epoxy potting compound is good to
300 to 350 F. The blue tape keeps the potting compound
from leaking into the port around the bottom of the tube. 
It will be polished when the epoxy kicks out and the 
tape is removed.

The second picture shows the 1/16th pipe boss for the
hose barb feeding pressure data to Tracy computer. There 
is one for each runner.

The third picture shows the potting of the side ports.
These end housings will be lapped until they are smooth.
Just a couple of thou are needed for this engine.
Probably a half hour or so on the lapping machine.

One advantage of having Mazdatrix do your engine is they own
their own lapping machine and can dyno the engine for you
on their own dyno with your intake manifold and or muffler. 

Engine parts are still at the balance shop. Any day now.

Paul Lamar
 
The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net            
Copyright 1998-2005 All world wide rights reserved.