Subject: Improving the 2nd gen turbo waste gate.
From: ACRE
Date: 4/5/2005, 1:13 PM

Here are some pictures from that article in RX Tuner magazine I was 
I was talking about.  Get the magazine for the complete story.
www.rxtuner.com

The trick is to grind the wall away from the hole so a larger hole can
be ground. Then grind down the floor so a larger Inconel washer can be welded
to the gate. If you get the right size and shape grinding wheels in the hardware 
store this can be done in a drill press.
 
Paul Lamar
 
The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net            
Copyright 1998-2005 All world wide rights reserved.