Rino Lacombe wrote:

I would like to get your comment on the weldability of the 13b cast iron
rear housing.
I broke a chip on an oil passage, it needs to be welded to seal the passage
from oil leakage.

Thanks
Rino Lacombe
13b turbo Glass Goose

Got a picture? If there is little stress on the part it should be OK.
Brazing might be better than welding if there is little or no stress.

Paul Lamar
 
The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net            
Copyright 1998-2005 All world wide rights reserved.