Doug Mueller wrote:

I would be interested in visiting with some Rotor Heads in the
Chicago

area if

there are any that would want to entertain the idea. I would like to

see some

other projects or just swap stories.
Doug Mueller
RX-6 13BT
N900DM
Boulder City, NV

Doug Mueller
RX-6 13BT
N900DM
Boulder City(61B),Nevada

Ben Schneider wrote:

Doug,
   I am just over an hour south of Chicago on Interstate 55 if you want
to
drive that far. I am building an RV7 with a Renesis. I am just starting
to
work on the the FWF. I am currently mounting the alternators. I have the
engine and RD1C gearbox on the mount, and have it mounted to a mock
firewall. I have my James aircraft cowling and will be mounting it so I
can proceed with cooling and intake.

     Let me know if you are interested.

             Ben Schneider
                  N713R  RV7 Renesis`--

Ian Beadle wrote:

Ben
I am planning the systems on my Renesis RV7 and am looking at the James
cowling. Could you post a sketch of where you are going to mount the oil and
water radiators.Are you going to use the competion oil cooler that is 50%
larger than stock? My RV7 is being built by a pro so I need to get on with
the fit out plans chop chop. I am planning to go all digita instruments
using Dynon and Tracy.

Ian Beadle  Western Australia-- 

 
The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net            
Copyright 1998-2005 All world wide rights reserved.