Doug Mueller wrote:

I would be interested in visiting with some Rotor Heads in the
Chicago

area if

there are any that would want to entertain the idea. I would

like to

see some

other projects or just swap stories.
Doug Mueller
RX-6 13BT
N900DM
Boulder City, NV

Doug Mueller
RX-6 13BT
N900DM
Boulder City(61B),Nevada

Ben Schneider wrote:

Doug,
   I am just over an hour south of Chicago on Interstate 55 if you

want

to
drive that far. I am building an RV7 with a Renesis. I am just

starting

to
work on the the FWF. I am currently mounting the alternators. I

have the

engine and RD1C gearbox on the mount, and have it mounted to a mock
firewall. I have my James aircraft cowling and will be mounting it

so I

can proceed with cooling and intake.

     Let me know if you are interested.

             Ben Schneider
                  N713R  RV7 Renesis`--

Ian Beadle wrote:

Ben
I am planning the systems on my Renesis RV7 and am looking at the

James

cowling. Could you post a sketch of where you are going to mount the

oil and

water radiators.Are you going to use the competion oil cooler that is

50%

larger than stock? My RV7 is being built by a pro so I need to get on

with

the fit out plans chop chop. I am planning to go all digita

instruments

using Dynon and Tracy.

Ian Beadle  Western Australia--

Ben Schneider wrote:

Ian,
   I will post some drawings later this afternoon, I don't have time just
now to sketch then out, but will get ou something by days end (at least
dys end on this side of the planet) Didn't want you to think I was
ignoring you.
    Ben Schneider

 
The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net            
Copyright 1998-2005 All world wide rights reserved.