Subject: Cowls will soon be available]
From: ACRE
Date: 4/23/2005, 8:48 PM


Will James wrote:

Hi Paul,

My copy of Kay's is on the way, Kuchemann to follow.
Will assimilate as able and with your permission
contact you when I start choking. Hope to have some
tenative soon, (or recieve well deserved trampling),
but at present , apparently well behind the power
curve
on this one. Really appreciate your input.

Will

http://www.jamesaircraft.com

Your welcome Will. judging from your work so far I
think you already
have a good understanding of the problem.  Hopefully
beautiful cowls with proper
cooling air intakes will soon be available. One of the
last stumbling
blocks to installing a successful rotary engine. As
you
can see we sure spend
a lot of time on this problem.

Paul Lamar

Will James wrote:

Hi Paul,

Just a final note and then I'll leave you alone for a
while. Just want all on your list to understand that
credit for this new design belongs to Chris Armstrong.
My part in the rotary arena has to date been limited
to
producing the cowls from the CAD drawings. Hope to
assist in achieving a viable final solution.

Thanks!

Will

You are no bother at all Will. I am very happy you are
on here.
Cowlings and sealed diffusers are keys to a cool rotary
engine installation.

I can supply you with section drawing for any cowl
design if you wish.
If you find a customer that needs a custom cowl for a
rotary powered
airplane and has a drawing of the firewall and the
position of the thrust
line I can do a 3D of the engine installation to check
the fit of in the cowl.
Make sure nothing sticks through the cowl skin :) I'll
then do a preliminary
cowl design in 3D for all the principles to agree on
the esthetics. Several
iterations if necessary. No charge for this service as
I have done dozens
already and have all the rotary engine parts drawn in
3D already.

Here is little more pointy iteration of what I uploaded
a couple of days ago.
BTW rads can be mounted vertically on the cool (right)
side of the engine as well.
Just in case the nose gear gets in the way. I suggest
you save these and use them
as talking points when discussing new designs. You have
my permission :)

Paul Lamar

Will James wrote:

When I grow up I want to be Paul Lamar
Thanks,
Will

No you don't Will. It is a dirty job vilified  by all but somebody has to do it :)

BTW folks my son and I updated the cooling section of the web site below so check
it out. I think "How to Cool" is now easier to read. Send me you criticisms.
We also added a couple of videos. One from Xtreme rotaries ahows an 800 HP 3 rotor
powered boat doing 120 MPH. The other is from NSU on the principles of the
Wankel narrated in German for now. Best animation of how the Wankel works
I have every run across.

Paul Lamar
 
The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net            
Copyright 1998-2005 All world wide rights reserved.