Subject: Cowls will soon be available
From: ACRE
Date: 4/23/2005, 10:22 PM


     Here is little more pointy iteration of what I uploaded a couple of
days ago.
     BTW rads can be mounted vertically on the cool (right) side of the
engine as well.
     Just in case the nose gear gets in the way. I suggest you save these
and use them
     as talking points when discussing new designs. You have my permission
:)

     Paul Lamar

Paul, Did you notice that the pressure cap sticks throough the cowl on
this model?
Bill Jepson

Yes!  Easy to fix. Lower the can:) Good example on why you need 3D.
The upper motor mount also sticks through. A more serious problem that
can be addressed by redoing the cowl lofting.

Paul Lamar

-Tony Snow wrote:

Paul,

Sorry if I sound stupid - I like the shark mouth design, it looks first
Tony Snow wrote:

Paul,

Sorry if I sound stupid - I like the shark mouth design, it looks first
rate.

Now I get to expose my ignorance - where is the oil cooler?

Tony Snow
Bearhawk #753
 rate.

Now I get to expose my ignorance - where is the oil cooler?

Tony Snow
Bearhawk #753

Bad 3D Tony. It is along side the rad in the bottom of the cowl.
Here is an exploded perspective.

Paul Lamar
 
The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net            
Copyright 1998-2005 All world wide rights reserved.

Shark-mouth-PERS-exploaded.jpg