Checking over the engine mount locations in your drawings for the Long EZ,
the top mount
is located too high and would require a major redesign.  The correct
location for the 1"x1"
(some use 1 1/4" or larger) aluminum angle extrusions are as depicted in the
attachment.
That is, the extrusions lay on top of the center section spar, just inboard
and against
the top fuselage wood longerons.

Richard Martin

OK Richard I'll fix it. Thanks.

BTW another advantage for the simple cooling system is you get get
a real slim cowl.


Paul Lamar
 
The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net            
Copyright 1998-2005 All world wide rights reserved.