Tom Webber wrote:

Jerry, Ed, I'll cut two tray's today and send them to the two of you
to check out for accuracy.  If you like what you see I'll cut some
from .125 6061 T6.  The test trays will be out of .080 5053 H38 so
there will be some warpage.  But you can check the hole patterns and
size.

Tom,  do  you know if the Renesis pan bolt pattern is different than
the 13B's?   Jerry

The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net            
Copyright 1998-2005 All world wide rights reserved.