Subject: 35 MPG RX8
From: Rotary engine
Date: 5/2/2005, 5:12 PM
To: Aaaaa

On Mon, 2005-05-02 at 10:54 -0500, Kent, Russell wrote:
Vance Jaqua (sp?) wrote:
Paul - Forget about spheres and cubes - If you start with the same R
value
(rotor size etc) and widen
the rotor the swept volume (displacement) will incease as a linear
funtion
of the width. for the same
compression ratio the TDC volume will incrase as the displacement
(linear
with width) the projected
area also has the same length - increase in area being linear with
width -
ie the volume ratio to area stays
the same. only the average distance spark to wall increases.

Paul Lamar replied:
Displacement should be adjsted to stay the same.
Flame travel distance in unit time is the bottom line. Flame front
speed
is constant.

... which is why we have two spark plugs. If you draw two circles of
diameter equal to the rotor width and centers positioned as the spark
plugs, you'll see that the resulting "figure eight" (epicycloid?) is
roughly the same shape as the rotor face.

Russell Kent