Gee that's funny. Also looks like what Kucheman & Weber advocates and
what I have been talking about for the last 5 years. So Ed finally got
the message? :) Is he claiming he invented this? :)
No not at all, in fact he commented that he was trying to follow the K&W
inlet gospel. He did get better cooling with the defuser.
Bill Jepson
Tracy Crook was the first to implement it to my knowledge.
Since the K&W required duct length is 2.5 times the rad dimension one
must use a larger opening if you don't have that length to work with.
Otherwise you need to use a thicker rad which is less than
optimum for flow at 100 MPH air speeds. Modern heat exchangers
designed for cooling engines as opposed to air conditioning cores are all going
to large frontal area and thin cores. Therefore the Kays and
London approach with the wedge shaped diffusers is more appropriate
to our use.
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2005 All world wide rights reserved.