Paul
Does anyone out there have a picture of the six port arrangement under
the manifold? All I can find on the web is the four port. Are the four
outer ports all the same size or are the lower auxiliary ones smaller,
and if so what are each of the sizes? In the picture of the previously
posted cut down manifold it looks like the upper ports are much bigger
than the bottom ones.
Tony Beaton
the large round top holes in the end housing is the reason the
RX8 high power engine can generated 240 HP.
Paul Lamar
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2005 All world wide rights reserved.