Paul,
I'm NOT using an AN fitting fuel regulator, just using the stock one. In
fact, I'm using regular high pressure fuel line (350 psi) and clamping
it onto the stock fittings with spring clamps and then going with fire
sleeve over that. Any observations, comments or warnings?
Brian Trubee
A 50 psi fuel system in an airplane is pretttttyyyy scary.
a pin hole leak can ruin your whole day if not 5 years of work.
I would go with AN Teflon lined hose.
BTW I said dash 6 but I was under the mis impression that was the ID
of the hose and not the OD. Dash six refers to the OD. Six times
1/16th of an inch. Here is an AN chart.
What you really need for a high power P-port engine is
dash eight. The Stock Mazda fuel line is about .3 inch ID
or about the same as AN dash 6. Dash 8 is about .39 ID. I am going
with the dash eight.
Paul Lamar
Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2005 All world wide rights reserved.