Subject: Renesis six ports
From: Rotary Engine
Date: 5/9/2005, 9:50 AM
To: AA-me



Paul

Does anyone out there have a picture of the six port arrangement under
the manifold?  All I can find on the web is the four port.  Are the four
outer ports all the same size or are the lower auxiliary ones smaller,
and if so what are each of the sizes?  In the picture of the previously
posted cut down manifold it looks like the upper ports are much bigger
than the bottom ones.

Tony Beaton

The large round top holes in the end housing is the reason the
RX8 high power engine can generated 240 HP.

Paul Lamar


Tony here are a couple of pictures of the manifold and the fuel rail. The
gears are to close off two of the ports.
Ian Beadle


Makes sure you don't leave any parts of those movable RX8 sixth port valves
in the engine. Chuck Dunlap had an off airport landing as one of the small
parts came loose and got into the engine.

Paul Lamar

The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2005 All world wide rights reserved.


Manifold.jpg

Manifold 2.jpg