Subject: AN fitting fuel pressure regulator
From: Rotary Engine
Date: 5/10/2005, 7:30 AM
To: AA-me



Anybody using an AN fitting fuel pressure regulator?
If so what are your experiences  so far?

Paul Lamar



I am using the one from TWM and it works well.  It can be seen in this
picture but it is a little out of focus.

Dave Leonard


Thanks Dave.
Thats interesting. Looks just like the Aeromotive from
the Summit Racing catalog picture. Part # AEI-13109  $137.95.
http://www.aeromotiveinc.com/

I see it has two AN dash 10 inlet ports. It appears one is
blocked off in your installation Dave.

----------------------------------------------------------
A1000 Injected Bypass Regulator, P/N 13101

For 1000 HP applications that require flexibility.

Intended for use with custom fuel rails, this true billet regulator was
designed
specifically for use with our A1000 Fuel Pump.

Base pressure (vacuum/boost disconnected) adjustable from 30 to 70 PSI.
Two -10 AN inlet ports, one -6 AN return port and 1/8" NPT gauge port
Beautifully finished with type II bright dip red and black anodized
coatings.
Alcohol compatible.
Fuel Pressure will rise on a 1:1 ratio when referencing boost.
----------------------------------------------------------

Makes sense since you are using a turbo.
Also there is this one that might be cheaper for a P-port engine.
          
------------------------------------------------------------------------
-
Compact EFI Regulator, P/N 13105

For applications producing up to 1,000 HP where space is at a premium.

Compact design fits small engine compartments while providing big
performance, flows
enough to handle 1,000 HP fuel pumps. Ideal for EFI systems where only
one inlet is
needed.

Adjustable from 30 to 70 PSI.
New design, equipped with removable -6 AN male fittings for inlet and
outlet ports-
eliminates the need to buy additional fittings and O-rings.
Vacuum/boost port relocated to the side of the cap for easier pressure
adjustments.
Fuel pressure will rise on a 1:1 ratio when referencing boost.
Bright zinc-plated steel bracket.
------------------------------------------------------------------------
-

Paul Lamar

I think this one might be better for the normally aspirated P-port
engine.
http://www.centuryperformance.com/detail.asp?product_id=MAL-4305m

Dash 8 in and out. Summit Racing  cost $98.88

Cost from this outfit $71.26.

---------------------------------------------------------------------
      Product ID: MAL-4305M
Fuel Regulator, 3-Port Return Style, Gas/Alcohol
Description:  The Mallory Universal Competition Return-Style Fuel
Pressure Regulator
for fuel injected engine applications. NOTE: This new regulator replaces
both the
MAL-4309 and MAL-4310 regulators.

Specifications:

    * New design utilizes dual layer diaphragm material that is not
affected by
today's gasoline additives
    * Hard anodized and works with gasoline and alcohol fuels
    * 100% billet housing allows for easy servicing
    * Easy to adjust High Flow Bypass System between 30 and 100 PSI
    * Includes vacuum boost/compensation port
    * Multiple inlet and outlet ports for easy of installation
    * Includes (2) #8 AN Fittings, (2) 3/8" NPT plugs, and Mounting
Bracket

----------------------------------------------------------------------

Paul Lamar


Paul,
This is the same as I am using.  One note though, the return comes out
the back of the unit.  This may, or may not be desirable for your use.

Mark S.



The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2005 All world wide rights reserved.