Subject: P Ports and standing wave fuel mist.
From: Rotary Engine
Date: 5/10/2005, 2:33 PM
To: AA-me



Paul,

I'm new to reading this list and don't have an archive of emails to look
back at.  Is there such an archive ?

I am curious about the P-porting.  Even with the pictures most of what I
read is like walking into the middle of a conversation.  I think that I
know what's going on but I want to know more.

The same with "standing wave fuel mist".  I think that I know what it
is, but still want to know more.

Archives ?  Maybe another group that covers these same issues ?  How
about a Hotrod Your Rotary book.  Is there such a thing ?

About the price of the TMW regulator that Paul Conner posted, at their
site, in the upper left corner is a price list, it may be outdated, the
highest number reg was not on the list.

Kevin

I just uploaded some stuff on the P-port. Then make sure you read
the website below on the subject. Sorry no archive.
I am working on some books but it will be six months or more.

The standing wave mist is a phenomenon that happens with tuned intakes.
Mixture pulses back and fourth in the pipes and so some of it hovers
around the entrance end of the pipes. We noticed it in the old
days (60s) when we used multiple Weber carbs on Chev V8 Can Am engines.
Not a problem now as almost all pure race cars use ram air plenums.

Paul Lamar

As an interesting aside that has nothing to do with standing wave mist,
 I met a young man today who, until recently,  operated  a chassis
dyno shop serving  drag and circle track racers.  I asked him if he had
any experience with direct injection into the bell mouths.  His  reply
was that they had tried it but had" better results when they moved the
injectors back some distance from the valve." Of course he had no idea
of our p port intake designs, and thought I was referring to very short
induction pipes of only a couple of inches on recip engines.  Somewhat
later,  I asked if he had any experience with rotaries and he said that
he had had the opportunity to work on several and that he loved the
rotary engine.   This kid is a brilliant sheet metal fabricator and tig
welder.  He has an english wheel and a plenishing (sp?)hammer that he
made himself. I saw examples of his work including a gorgeous exhaust
system on a Triumph MC that is pure art.   I am going to get to know
him a little better but at first meeting I thought he was very high
quality.  I might put him to work on some of our stuff.    Jerry

-- 
The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2005 All world wide rights reserved.