Subject: P Ports and standing wave fuel mist.
From: Rotary Engine
Date: 5/10/2005, 2:32 PM
To: AA-me


Paul,

I'm new to reading this list and don't have an archive of emails to look
back at.  Is there such an archive ?

I am curious about the P-porting.  Even with the pictures most of what I
read is like walking into the middle of a conversation.  I think that I
know what's going on but I want to know more.

The same with "standing wave fuel mist".  I think that I know what it
is, but still want to know more.

Archives ?  Maybe another group that covers these same issues ?  How
about a Hotrod Your Rotary book.  Is there such a thing ?

About the price of the TMW regulator that Paul Conner posted, at their
site, in the upper left corner is a price list, it may be outdated, the
highest number reg was not on the list.

Kevin

I just uploaded some stuff on the P-port. Then make sure you read
the website below on the subject. Sorry no archive.
I am working on some books but it will be six months or more.

The standing wave mist is a phenomenon that happens with tuned intakes.
Mixture pulses back and fourth in the pipes and so some of it hovers
around the entrance end of the pipes. We noticed it in the old
days (60s) when we used multiple Weber carbs on Chev V8 Can Am engines.
Not a problem now as almost all pure race cars use ram air plenums.

Paul Lamar



I suspect that if you had high speed video of the intake process, you
would see that the mixture is injested in a series of 'gulps' and 'burps'.
The cloud may not hover as much as it is burped out of the intake to a
certain height, and then gulped back in.  Every time the port opens, a
column of mixture is drawn into the chamber (gulped), developing stream
velocity.  Then the port flow is briefly snapped off as the other side of
the rotor sweeps by.  Snapping the flow off (driving the local velocity to
zero) causes a pressure wave to travel up the intake, briefly
stopping/reversing the mixture column in the stack (burping).  If the end
of the intake tube is exposed to uncontained airflow, some of that burped
mixture is swept away in the ambient air.  Not good for BSFC numbers...
If the end of the intake tube is not exposed to slipstream, or cooling
air, there's probably no need for a plenum - if an engine is on a dyno,
for instance.  In a moving installation, containing the cloud in a plenum
seems like a practical way to handle the issue.

Instead of high speed video, it might be fun go out at night with an
inductive pickup timing light (with timing adjustment knob) and shine it
on the intakes.  I could imagine that as you adjusted the timing setting
on the light you might be able to catch the clouding forming and
disappearing at the mouth of the intake.

Regards,

Matt-


The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2005 All world wide rights reserved.