Subject: Joining the Aircraft Rotary Engine Newsletter
From: Rotary Engine
Date: 5/12/2005, 7:55 PM
To: AA-me


Dear Paul,
I would very much like to join your Aircraft Rotary Engine Newsletter.
A friend of mine, Andre Claassen, gave me your address and your
news letter has solved already a great deal of my problems and stop some
of my anxieties.
I have build and helped build and design some aircraft over the last 30
years and have reached retiring age (65) after a long career in the
South African Airforce as a pilot (mostly helicopters) and there after
as a Senior Flight Ops Inspector at our Civil Aviation Authority.
I am in the process of ordering a RV-9A which I hope to power with a 13B
after having red Tracy Crook's book on the subject.
Because I want the nose wheel model I have to order a engine frame with
the Kit as the nose wheel frame is part of the engine frame.  My
question to you, and please forgive my arrogance for being so quick with
a question, is which engine frame from the advertised
Lycoming/Continental engine frames will be the best with the
least/easiest modifications to accommodate a 13B engine in a RV-9A
aircraft.  Paul I know this is a tall order but if you can help me, I
will be most thankful.
Kind Regards
Jozua (Joos) Cloete

Best to build a custom motor mount (engine frame). I'll be glad to design
one for you if you send me a sketch of the firewall with the outline
shown and dimensions on the motor mount  hard points. I also need
the position of the thrust line and the length of the cowl from
firewall to spinner. No problem. A few digital pictures of the current
Lycoming mount would help.  Check out the web site below for
some examples and a how to do it your self.

Paul Lamar

The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2005 All world wide rights reserved.