Tracy Saylor finally got his RV10 motor mount and cowl
kit. Looks like we may be able to design a 3 rotor engine mount
that will bolt directly to this mount. I'll see what
I can do. I was unable to measure the cowl length
so I am guessing it is around 40 inches long.
The thrust line position I am assuming is centrally
located between the four motor mounts shown. Those with
an IO-540 or O-540 engine please check this and verify it
for me.

Since the cowl is 41 inches wide more or less there is room in there
for two 3 rotors engines side by side :) The intake manifold
and muffler design will be a piece of cake.

Paul Lamar

The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2005 All world wide rights reserved.