If you don't have room in the back seat area put the
the sumps behind the firewall as in this 3D
The return fuel is precisely the problem and MUST be returned
to ONLY the tank you are drawing fuel from. Not the sump tank or
tanks under any circumstances. There is no other choice but to
use a double level left and right fuel tank selector. Is your life worth
20 feet of 1/2 inch aluminum tube or not? Apparently John Denver did
not think so.
If you think there is a better way of doing it send me a sketch.
I am open to suggestions.
Paul Lamar
Don't forget the excellent choice of a safe fuel system which Tracy uses
in his RV-4, if you don't want the expense of a dual valve.
Main tank/Aux tank. One wing tank is the main tank. All engine fuel feed
is from this tank, all return fuel is to this tank. The other tank is an
auxilliary tank. Just gets a facet type LP pump with a switch wired
through a float switch on the Main tank, so you can't pump all the fuel
out through the main tank vent. You can get tricky and add a timer
circuit as I believe Tracy has. push the button and you get a fuel
transfer of X mins of cruise fuel flow.
I second the recommendation to get the fuel pumps back as close to the
tank as possible. Fuel lines under pressure are much safer than suction
lines. Far more light aircraft crash due to vapor lock than due to fuel
leaks.
Regards,
Mark
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2005 All world wide rights reserved.