Subject: ACRE AD on Andair fuel selector valves.
From: Rotary Engine
Date: 5/22/2005, 8:19 AM
To: AA-me


   If you don't have room in the back seat area put the
   the sumps behind the firewall as in this 3D

   The return fuel is precisely the problem and MUST be returned
   to ONLY the tank you are drawing fuel from. Not the sump tank or
   tanks under any circumstances. There is no other choice but to
   use a double level left and right fuel tank selector. Is your life worth
   20 feet of 1/2 inch aluminum tube or not? Apparently John Denver did
   not think so.

   If you think there is a better way of doing it send me a sketch.
   I am open to suggestions.

   Paul Lamar
   ==============================================
   First Paul what you are advocating will kill people;

 -"The return fuel is precisely the problem and MUST be returned to
   ONLY the tank you are drawing fuel from. Not the sump tank or tanks
   under any circumstances"-

   Even if you return the fuel to the tank that feeds the sump you are
   drawing from, the fuel injection pump(s) will pump the fuel through
   the fuel rail, the regulator will bypass the excess and what little
   fuel you had in your sump will now be in your fuel tank, the sump
   will be empty because the flow from the supply tank to the sump
   cannot keep up with the pump recirculating it into the tanks. NOT a
   good idea.
   Second, references to John Denvers death had nothing to do with this
   unless you are opportunistically using it to emotionally charge the
   topic.
   ...Chrissi

www.CozyGirrrl.com <http://www.cozygirrrl.com/>
Cozy Mk-IV RG 13B-turbo
Plans #957 Chapter? big pieces done, details, details

Nonsense  and I think you know it. It depends on the size of the line
gravity feeding the sump tank. To give you a ridicules example suppose the
line feeding the sump was two inches in ID? If the engine is burning 10 gallons an
hour and the size of the line feeding the sump tank can't flow twenty gallons
an hour under gravity alone the line is a very small line indeed. Furthermore you
are forgetting to evaluate the rate of flow through the small return line from
the pressure regulator which is now under atmospheric pressure alone.
Or slightly above it at the pressure regulator end.

John Denvers crash has a lot to do with pusher fuel systems in general.
Have you read the NTSB report?

I am sorry I don't like your unique system and I hurt your ego. Please take
up another hobby or use a different engine if you can't discuss this
in an objective and rational way.

Paul Lamar


The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2005 All world wide rights reserved.