If you don't have room in the back seat area put the
the sumps behind the firewall as in this 3D
The return fuel is precisely the problem and MUST be returned
to ONLY the tank you are drawing fuel from. Not the sump tank or
tanks under any circumstances. There is no other choice but to
use a double level left and right fuel tank selector. Is your life
worth
20 feet of 1/2 inch aluminum tube or not? Apparently John Denver did
not think so.
If you think there is a better way of doing it send me a sketch.
I am open to suggestions.
Paul Lamar
Hi Paul. what is wrong with feeding low pressure fuel to a header tank
thru a fuel cock, feeding the HP pump from this header tank and
returning the residual HP fuel to the header tank? BR, ,Dave McC
EFI return systems heat the fuel so the heat builds up in the
header tank. Sometimes to the point of vapor lock with auto fuel.
Returning the fuel to the main tank mixes it with the cool fuel.
also the large surface area of the main tank cools the fuel better.
Here are a couple more 3D's with the sump tanks behind the spar.
The shaft extension does not seem worth it it as the valve
must be rotated 90 degrees complicating the plumbing.
I also moved the fuel pumps under the back seat.
Paul Lamar
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2005 All world wide rights reserved.