I don't want to add fuel to the fire, but would like to post a simple
observation.
Our R-44 helicopters have the simplest fuel system ever:
Aux-Tank drains into the main tank - main tank gravity feeds through a
shut-off valve ( which normaly stays open at all times) and a gascolator to
the carb.
Our ( and customer helicopters) have colors ranging from white over silver
to dark blue and green - yellow. Basically the whole spectrum.
In my location daylight temps range from 24ºC to 40ºC as indicated by the
OAT gauge.
Now here it comes: Under these conditions, no matter the color, tha tanks
are sometimes so hot to the touch that you cannot maintain your hand on
them. (Not just after heatsoaking on the ramp but also after flights)
Draining fuel always shows fairly cool fuel until the fuelline fills with
fuel from the tank - it is hot!
So fuel temp shouldn't be the worst of concerns!
I would not put too much attention on wether to return to the tank in use or
the headertank, BUT to:
a) headertank (if used), sufficiently big and deep to stay at least 3/4 full
at the worst
b) good vent-line so vapor-bubbles can escape
c) good (high) flow in the HP system (headertank forward) to constantly
purge any possible vapor
d) design HP routing so that vapor can easily move up-wards.
Chrissi,
I see your point, but you assume you know when things will go wrong. You
probably wont until your sump is dry anyway.
What I mean is (if I read you right...), you say with return fuel in the
sump instead of the tank you will have more "emergency time" to play with,
right?
Well, when and how to you figure out that the tank doesn't feed the sump
anymore?
If I ever get to it (...building something flyable with a Rotary), my fuel
system will be able to fill the sump in no time (by gravity or pump...),
which probably means huge fuel lines - 1/2" or even 5/8". So if these lines
ever get plugged I will not know until the sump is dry - it only will be a
little later if I return to the sump instead of the tank. Time of incident
will be academic only...
I wouldn't say that Paul's system is advocating to kill people. Until
recently that was the way to go in cars.
Only cars don't have header tanks, ....as far as I know.
FWIW,
Thomas Jakits
PS: Until monday I will look up the fuel system of the new fuel injected
R-44, but as far as I understand this system only provides pressure to the
injector pump and if there is any return it only goes to the pump intakes (1
engine driven, 1 electric - always on)
"Well, when and how to you figure out that the tank doesn't feed the sump
anymore?"
====================================================
We have a pare of sensors that tell us if at any time the sump is
not completely full of fuel, the sump has a vent on each side as
well to insure air or vapor does not accumulate in the sump.
...Chrissi
www.CozyGirrrl.com <http://www.cozygirrrl.com/>
Cozy Mk-IV RG 13B-turbo
Plans #957 Chapter? big pieces done, details, details
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2005 All world wide rights reserved.