If you don't have room in the back seat area put the the sumps behind
the firewall as in this 3D
The return fuel is precisely the problem and MUST be returned to ONLY
the tank you are drawing fuel from. Not the sump tank or tanks under
any circumstances. There is no other choice but to use a double level
left and right fuel tank selector. Is your life worth 20 feet of 1/2
inch aluminum tube or not? Apparently John Denver did not think so.
If you think there is a better way of doing it send me a sketch.
I am open to suggestions.
Paul Lamar
Hi Paul. what is wrong with feeding low pressure fuel to a header tank thru
a fuel cock, feeding the HP pump from this header tank and returning the
residual HP fuel to the header tank? BR, ,Dave McC
EFI return systems heat the fuel so the heat builds up in the header tank.
Sometimes to the point of vapor lock with auto fuel.
Returning the fuel to the main tank mixes it with the cool fuel.
also the large surface area of the main tank cools the fuel better.
Here are a couple more 3D's with the sump tanks behind the spar.
The shaft extension does not seem worth it it as the valve must be rotated
90 degrees complicating the plumbing.
I also moved the fuel pumps under the back seat.
Paul Lamar
I am under the impression that JD bought the aircraft from another builder.
If that is so, then the issue of how the fuel system was configured may not
have been known by JD.
Giffen Marr
LIVP/20B 35%
He knew about it.
PL
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2005 All world wide rights reserved.