Has Mr. Haines talked to Tracy Crook about his 1400 + hours in his RV-4
with a rotary engine.
And how about not worrying about swallowed valves and rods thrown
through the crankcase?
If you haven't driven an RX7, you don't know what "smooth" is.
This happened to me:
http://www.angelfire.com/ca2/Dragonfly/Crank.html
(sorry for the pop-ups)
I was under the hood, instrument training, missed approach, x-wind departure,
roughly 700' ASL. Made the "impossible turn" and landed safely with enough
inertia to taxi part of the way back to the tie downs.
Pat
You are one lucky guy Pat.
The trouble with the 180 turn back to the runway is we don't practice it.
Our seat of the pants flying judgements instantly become way off.
When the engine quits the drag on the airplane is much higher due to
the stopped or wind milling prop. This changes the flight
characteristics to a whole new realm.
When I land I am NOT constantly checking the airspeed indicator as landing
becomes second nature. However this now becomes absolutely essential
once the engine quits at low altitude. Your work load suddenly becomes
much higher as the pitch angle required to maintain flying speed
is now much steeper. This is particualry important if you are flying
a new airplane type with just few hours in it. This is the exact case with
most new expermental airplanes just being flown for the first times.
Every instructor I have had always told me to pick a spot more or
less straight ahead. My twin instructor told me to pull the power on
the good engine and land straight ahead. Unfortunately present instructors
don't teach slips and they are your best friends when the engine quits.
As builders we have a powerful incentive to try to save what we just spent
five or more years of our life building. You need to overcome that and
save your life first. Your family will thank you for it.
Paul Lamar
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2005 All world wide rights reserved.