Subject: ACRE AD on Andair fuel selector valves.
From: Rotary Engine
Date: 5/27/2005, 9:36 PM
To: AA-me


EFI return systems heat the fuel so the heat builds up in the
header tank. Sometimes to the point of vapor lock with auto fuel.
Returning the fuel to the main tank mixes it with the cool fuel.
also the large surface area of the main tank cools the fuel better.

Has anyone actually done a test to measure the temp of the returning
fuel?

Larry Wiechman

We had some data on this awhile back but I don't recall what the
temperature was. My new email program does not allow me to search all old
messages. One person I know using 100LL and EFI on an aircraft engine is
having
sucess just returning the fuel to the inlet side of the high pressure
pump.

Paul Lamar


In April 2003 I was doing the initial test flying on a Glastar with a NSI
Soob, when this subject came up. On this aircraft there is a one gallon
header tank mounted on the top, front, centre firewall, which is the return
point for the FI. After a one plus hour flight and a short taxi back to the
hangar, on a near ICAO standard day I felt the header tank and it was cool
to the touch. Not very scientific, I know.

John


We have a flow meter in the return line on the dyno so we should have
some numbers on return flow if I can get this wiring figured out and
the computer is not fried. Some wires appear to be properly connected
so it is not as bad as I first thought.

Paul Lamar

The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2005 All world wide rights reserved.