Dave is running it as we speak at 3000 RPM with a 20 HP
load to break it in. I called Tracy and he said it won't
run smooth without a load. He was absolutely correct.
12 inch HG manifold pressure
Intake air temp 87F
BSFC .76 to 1.15. I am not surprised at this low load.
That is why cars get bad gas mileage.
Fuel pressure 34.5 psi
3.3 to 4.6 gallons per hours
oil pressure 125 psi at 175F
oil pressure 100 psi at 210 F
EGT were both the same at about 1200 F.
This is the default map with the mixture
knob about 10% on the lean side.
No problem with fuel leakage out of the slide throttle.
We added a catch tray but it caught no fuel.
We will still seal the slide throttle tomorrow
to be double safe.
The engine starts right up when it is warm. Less than
one or two turns of the crank. The fuel injectors mounted
near the trumpet mouths are doing the job they
were designed to do as the runners are running almost
ice cold. That means heavy duty fuel vaporization is taking place
in the intake runners.
Paul Lamar
This is very exciting! Keep us posted with everything you find (I am sure
you will)..
Will it idle?
No surprise about no fuel leak. As long as the engine is turning, even
with no air filter, there is generally vacuum in the intake.
Regards,
Matt-
VE N34RD, C150 N714BK
We don't know yet about the idle. There is quite a difference
between a a dyno and a prop. A prop is like a big flywheel.
We will probably try a fee things tommorrow.
Paul Lamar
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2005 All world wide rights reserved.