Subject: impact renesis
From: Rotary Engine
Date: 6/2/2005, 12:32 PM
To: AA-me




Dear Scott
      If I were you I would stay away from any eng
that had front
impactand more so if there are parts broken due to
the impact. You
are taking a
real chance that no inside parts are broken or
bent and for
$3500.00 that is
kind of on the high side. I would sit this one out
and keep on the
look out
for another one.  Just my opinion.
                                                

Regards                                         

    Ed Klepeis
techwelding@comcast.net


>
> I found a (manual) renesis engine from a wrecked
> RX-8 with 1,000 miles on it for what seems like a
> very reasonable price ($3,500 + shipping).  The
> salvage company says it has a cracked intake
> manifold, but is otherwise intact.  I asked for
> digital picture and inquired about frontal impact to
> the drive pulleys.
>
> Does anyone have any other suggestions that might
> help me to evaluate this engine from afar?
>
> Scott Gettings


Dear Scott
      If I were you I would stay away from any eng
that had front
impactand more so if there are parts broken due to
the impact. You
are taking a
real chance that no inside parts are broken or
bent and for
$3500.00 that is
kind of on the high side. I would sit this one out
and keep on the
look out
for another one.  Just my opinion.
                                                

Regards                                         

    Ed Klepeis
techwelding@comcast.net



Thanks for all the input.  I'll either buy a new one
or go with a PP 13B. (Congrat's to Paul on the PP).

Scott Gettings

We are going to do some HP runs in a few hours.

Paul Lamar

-- 
The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2005 All world wide rights reserved.