Subject: It;s alive the slide throttle P-port engine
From: Rotary Engine
Date: 6/3/2005, 9:31 AM
To: AA-me


   BTW your comments on the return flow getting hot is very pertinent
   to what we are going through on fuel systems. Got any data on
   return flow fuel heat?

No hard data, sorry. At idle, there is a lot of recirculation, so the
fuel can pick up a lot of heat from the pump and pipe friction. At
power, there is less recirculation, but the whole environment might be
hotter. It would therefore seem to be somewhat application dependent, as
well as dependent on ambient conditions, and of course dependent on how
much fuel there is in the tank.
Jon

We were measuring it yesterday but we did not run long enough
for anything meaningful. Dave was smart. He put the return
flow sensor ahead of the pressure regulator. It now seems to
be very stable.

Paul Lamar
-- 
The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2005 All world wide rights reserved.