Subject: It;s alive the slide throttle P-port engine
From: Rotary Engine
Date: 6/3/2005, 9:15 PM
To: AA-me


    >>>> **** . The fuel injectors mounted
    >>>> near the trumpet mouths are doing the job they
    >>>> were designed to do as the runners are running almost
    >>>> ice cold. That means heavy duty fuel vaporization is taking place
    >>>> in the intake runners.
    >
    > Paul Lamar

   ***** Congrats Paul.
   This suggests that if the injectors are mounted back from the port,
   the risk of intake icing could be a significant problem, especially if
   the throttle body is close to the port. Maybe less so with slide
   throttles, but with partial slide throttle, ice could form where the
   air impinges. BR, Dave McC

   Perhaps. An alternate air control could get heated air.

   Paul Lamar


I'm wondering why you chose to mount the injectors upstream of the
throttle?

Please excuse if this question has already been addressed -- I'm new to
this forum and have been merely lurking until now.

Regards,

Gordon Arnaut
Ontario, Canada.

Some others have measured slightly better BSFC with the injectors
up stream. The intake pipes  run ice cold an indication a lot of fuel
vaporization in the runners which is what you want for
an homogeneous mixture.

Paul Lamar


The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2005 All world wide rights reserved.